Check that the saw stops when an incorrect width is detected

WHAT YOU NEED 

Standard Personal Protective Equipment

  1. Open any job file in Simple.
  2. Select an uncut member or stick.

  3. Load a board that is a different width than what is requested.

    EXAMPLE 

    If the selected member or stick is 90 mm wide, load a 70‑mm-wide board instead.

  4. Press Cut Selected Uncut on the toolbar and make sure that the saw flags the error to the operator.

    Note: an "Incorrect Timber Width" error notification should be displayed, or the Diagnostics window should pop up and show a "Material Dimension Error".